BUILD IT:

YellaWood® Picnic Table

Build this picnic table out of YellaWood® brand pressure treated pine and get set to enjoy many family picnics in your own backyard.

Download a printer-friendly (pdf) version of this project


Materials List:

11 2" x 6" x 6' treated lumber

2 2" x 6" x 10' treated lumber

3 2" x 4" x 8' treated lumber

16 4” machine bolts, 3/8” diameter, with 2 washers per bolt

1 lb. 8d, double hot-dipped galvanized or zinc coated nails

TIP: Use water repellent or stain with water repellent when your job is finished to help protect your pressure treated wood from splitting, checking, and warping.

Use fasteners and other hardware which are in compliance with building codes for the intended use.*

For important information concerning mold growth on wood products, see the Important Information section online or visit www.epa.gov.

*Electroplated galvanized fastener and metal products are typically not accepted by the building codes for use in exterior applications, regardless of the type of wood used.

For important information regarding proper fasteners to use with ACQ treated wood, please see our Fastener Information Sheet